New York City 8-Hour Fall Prevention for Construction Practice Test

These questions are part of the practice quiz. Start practicing

• What is the minimal capacity required for a fall restraint system?
• Who is responsible for conducting a hazard assessment?
• What is a proper technique for maintaining a carabiner gate and closure?
• What is the primary focus of a fall incident investigation?
• Falls account for what ratio of worker deaths in construction?
• Who should be identified by name in a fall protection plan?
• Which equipment is essential for distributing fall arrest forces over the body?
• What percentage drop in workplace fatalities has occurred since OSHA was enacted and enforced?
• Which of the following is NOT a part of regular safety equipment inspection?
• Which is a sign that a lanyard may need replacement?
• Which of the following is specifically a Competent Person responsibility when it comes to fall protection?
• What is the area where certain work can take place without the use of guardrail systems or personal fall arrest systems?
• When should workers be trained on fall hazards?
• How frequently should a fall protection plan be reviewed and updated?
• What aspect of a Competent Person’s qualifications is most crucial?
• What is the term for the component in a fall protection system that connects other components to an anchorage?
• According to OSHA, at what height are trigger heights specified for General Industry?
• What is a hazard assessment and control tool frequently used by employees to recognize, evaluate and control fall hazards on jobsites?
• In fall protection systems, what role does the deceleration device play?
• How should scaffolding be maintained to ensure safety?
• What is a basic principle of adult learning?
• What type of training is fundamental for workers who are exposed to fall hazards?
• What is one of the leading causes of falls in construction work environments?
• In construction, what is a primary cause of injuries related to working at heights?
• What are the two major types of fall protection harness buckles?
• Is submitting a course evaluation a requirement for completing this course?
• What is the effect of proper training for a Competent Person?
• Besides the webbing, what other part of a harness should be inspected?
• What factor increases the risk of falling when using a ladder?
• What constitutes a majority of the requirements for a Competent Person?
• Which of the following is NOT a major component of a Personal Fall Arrest System?
• What feature must scaffolding have at heights of 10 feet or more?
• What is the primary function of a fall arrest system?
• Which of the following is NOT a requirement for identifying a Competent Person?
• When using a ladder on a landing area, how many feet should the ladder extend above the landing?
• Standing water or a sheen of water is the typical foreign substance associated with many slips. What is the truth of this statement?
• Which of the following is a special fall hazard that may call for increased protection?
• Which of the following does OSHA NOT regulate?
• What condition should a safety net be in before it can be used?
• Why is it essential for an employer to ensure a Competent Person is appointed?
• How many construction deaths occurred in 2017?
• Which of the following is an element of an effective fall protection plan?
• When did it become prohibited to use a body belt for fall arrest?
• What type of fall protection might be necessary on a job site where multiple trades are working simultaneously?
• Which is an indication of a fall protection harness that is acceptable to wear?
• _______ is a good practice for keeping tools from falling.
• When is the use of a safety monitor system permitted for fall protection?
• What is essential to do when caring for a ladder?
• Which of the following can be considered a personal fall protection system?
• What are the reasons for holding a tailgate safety meeting?
• Which responsibility falls specifically on a Competent Person?
• OSHA requires fall protection when working at heights of ______ feet or more.
• What are the conditions under which cable guardrails provided by a steel erector can remain in place for other trades after steel activity has been completed?
• What is the number one cause of fatalities in construction?
• At what height are construction worker deaths most prevalent in the US?
• What is true about a personal fall protection system harness?
• What should the wearer of fall protection equipment do with harness labels?
• What is the primary purpose of a fall protection program on a construction site?
• The rate of work-related deaths among ironworkers is how many times higher than the construction average?
• What factor must be considered when selecting fall protection equipment?
• How can a full body harness lead to injury despite preventing a fall?
• What is a key practice when using scaffolding?
• According to OSHA, a Competent Person must have what regarding the specific operation under their authority?
• What is a rope grab in a fall arrest system?
• What should be done to a harness with defective webbing or hardware?
• What should be avoided when caring for scaffolding?
• Which personal protective equipment is essential for fall protection in construction?
• In January 2017, OSHA issued a final rule on Walking-Working Surfaces and Personal Fall Protection. Which type of industry does this new rule principally cover?
• What should you watch for when performing a fall hazard assessment?
• According to OSHA, how long should trainers spend familiarizing themselves with a fall prevention toolbox talk?
• Results of a lanyard inspection by a competent person must be:
• While using a ladder, what is the recommended practice?
• Which device travels on a lifeline to arrest the fall of a worker?
• What is a good example of on-site equipment to assist workers in case of a fall?
• In construction, what is a common method to prevent falls from roofs?
• Frequently cited OSHA ladder violations include which of the following?
• What is the primary purpose of a guardrail system?
• How many construction standards roughly require identifying a Competent Person?
• What should be done if fall protection equipment is damaged?
• What should workers do when they notice a hazard?
• Which of the following can damage webbing or rope lanyards?
• When evaluating a Competent Person, most requirements are based on which criteria?
• What is required in OSHA fall protection for construction?
• Which of the following is NOT part of a Fall Arrest System?
• A Competent Person must have the authority to do what?
• How long is a typical tailgate meeting?
• What is the correct approach to take if a person falls and is secured by a Personal Fall Arrest System?
• Which worker type had the highest percentage of fatal falls in the US from 2011 to 2015?
• What is the purpose of a roof permit system?
• Which of the following tend to be safer on a job site?
• What should you check when inspecting a lifeline?
• This fall protection equipment component is used for positioning work ONLY and NOT for fall arrest.
• What is the most effective way to protect workers from falls?
• What does one hundred percent fall protection refer to?
• Who is primarily responsible for the safety of workers on construction sites?
• In the context of fall protection, the term "unprotected sides and edges" refers to which scenario?
• How should ladders be positioned to ensure safety?
• What are the three fundamental elements of a personal fall protection system?
• What do experienced fall protection qualified and competent persons agree about 100% fall protection?
• What should be provided with operating mobile equipment near an excavation?
• OSHA has identified four areas of construction as leading causes of fatalities. What is one of these areas?
• What should be included in pre-shift safety meetings regarding fall hazards?
• What does 29 C.F.R. 1926.502(i) specifically address regarding fall safety?
• How can you seek help for content-related questions?
• Which of the following is essential information for inspecting safety equipment?
• In a fall protection plan, which element is essential for effective hazard mitigation?
• What should you do to get more time in the course if you've finished the courseware but haven't accumulated enough time to meet the course minimum time requirement?
• What is the maximum number of employees allowed under a safety monitor system?
• Which type of fall is the leading cause of injury or disability in the construction industry?
• Which statement is true regarding the top 25 OSHA construction standards violations?
• What is a common cause of slips on job sites?
• In a fall protection system, what role does the anchorage system serve?
• What can reduce the chances of falls during construction work?
• What is the maximum vertical distance safety nets should be placed from the work surface?
• What percentage of slip and trip hazards occur while handling material and walking through the job site?
• Which safety practice can help to prevent falls from heights?
• What is a safety monitor's main responsibility on a job site?
• Which of the following is NOT a proper method to prevent falls when working at heights?
• If a wire rope is used as a guardrail, flags should be placed at intervals of ______ feet.
• What is essential to combat workers' complacency on job sites?
• Which organization’s mission is to save lives, prevent injuries, and protect the health of US workers?
• Which individuals should be encouraged to provide their input during tailgate safety meetings?
• Which size company has the largest percentage of fatal falls in the US?
• In the context of fall protection, what is the purpose of a Personal Fall Arrest System?
• Which of the following roles is essential for ensuring safety compliance on construction sites?
• What is a required fit setting for a full body harness?
• Which statement best describes what a Competent Person is expected to do with regard to operations under their authority?
• What is the approximate time it takes to fall from a 10-foot ladder?
• Which of the following is considered a serious OSHA violation related to roofing?
• What should be done before using a ladder?
• What is the primary responsibility of the employer regarding the Competent Person in construction?
• Tufts on the surface of the webbing of a fall protection harness indicate what?
• What does "100% fall protection" signify?
• What is a roof that has a slope of less than or equal to 4 in 12 referred to as?
• At what height should fall protection be provided on an unprotected side of a building?
• OSHA's construction standard for general safety and health requires what?
• Which type of fall protection equipment is used to prevent a fall from occurring?
• At what height is fall protection required according to OSHA regulations?
• According to OSHA, how often should fall protection plans be reviewed?
• What should be maintained to minimize slip hazards on construction sites?
• What should be done if a worker is found not wearing fall protection when required?
• Where are the highest number of non-fatal falls most likely to occur at a job site?
• OSHA regulations provide detailed systems and practices for different types of craftsmen. Which is an example of a practice for roofers?
• Which of the following is an important part of a fall protection program?
• When inspecting a rope lanyard, what specific aspect should you look for?
• The most frequently cited serious OSHA violations involving steel erection are for:
• What key aspect is important in fire protection on construction sites?
• Which element is crucial for ensuring the effectiveness of a safety net on worksites?
• When should personal fall protection systems be used?
• Which of the following is an example of Fall Arrest equipment that protects a person from hitting the ground or a heavy object?
• A Fall Restraint is different from a Fall Arrest System because it ________.
• OSHA specifies that top rails on guardrails must be at least ______ thick to prevent cuts and lacerations.
• What is the first step in inspecting a lanyard?
• Generally, what makes the best tailgate safety meetings?
• What is the primary goal of safety meetings on construction sites?
• What is an ideal outcome of a tailgate safety meeting?
• What is the most effective way to reduce fall hazards on a construction site?
• Is it permissible to interchange components from different manufacturers for a Personal Fall Arrest System?
• A toolbox talk normally lasts approximately:
• Which statement is true about fall protection equipment?
• The third leading cause of falls in construction (resulting in more than 100 deaths per year) is related to the use of what?
• Which component should be inspected on a shock absorbing pack?
• According to OSHA, what is a Competent Person required to demonstrate?
• What is the minimum weight a safety net must be able to withstand?
• What is the purpose of the OSH Act General Duty clause?
• What is essential for minimizing fall risks on construction sites?
• Which type of knowledge is crucial for a Competent Person regarding OSHA standards?
• Which type of situation is likely to cause a loss of balance or bodily support?
• Scaffold failures are often the cause of which of the following?
• Why is fall hazard control important in construction?
• According to industry statistics, how often do fall-related incidents occur in construction?
• What is a recommended action during a toolbox safety meeting?
• Which of the following is an example of an Administrative Control?
• What is the primary goal of fall protection programs in construction?
• What is a requirement when tying two ladders together?
• What is the potential hazard of a poorly fitted full body harness?
• What is one element critical for creating an effective safety program on a job site?
• What primary goal does OSHA aim to achieve through its regulations?
• Which of the following is NOT a category for OSHA standards?
• Generally, because of their limited elasticity, what should web lanyards not be used for in fall arrest systems?
• Which of the following is a key element of a fall protection program?
• When do fall hazards need to be evaluated?
• Which of the following is a common fall hazard in construction?
• What is a key trait of a good trainer?
• What are the two major categories of fall protection equipment?
• What is the benefit of keeping ladder and scaffolding areas clear?
• What is the most effective method to protect against a fall hazard?
• Which of the following is a key component of a fall protection plan?
• Why are slips so common on construction sites?
• When calculating fall clearance distances, is it true that calling 911 is an adequate response to a fall hazard emergency?
• You are at higher risk of falling if your portable ladder is _________.
• What is one of the key responsibilities of employers regarding fall protection?
• When should you start to evaluate the effectiveness of a Fall Protection Plan?
• What is an important piece of advice for someone leading a toolbox safety meeting?
• Who ultimately holds the responsibility for naming the Competent Person?
• What is one important quality a Competent Person must possess?
• A fall hazard (per OSHA definition) is created whenever workers must climb onto trailers, materials or equipment whose height exceeds what from the lower level or ground?
• When enough time in the course has been accumulated to meet the minimum time requirement, can you skip ahead to take the course exam?
• Fall protection is crucial during which type of construction process?
• A "competent person," as defined by OSHA, means someone who is good at what they do. What is the truth of this statement?
• What should the minimum tensile strength be for D-rings and snap-hooks used in safety systems?
• Which of the following areas requires that employees be trained by a competent person?
• Which part of the construction process is directly addressed in the regulation related to Demolition?
• What is the main purpose of a safety harness in construction?
• What role does training play in fall prevention on construction sites?
• Are snaphooks required to be the locking type with a self-closing or self-locking keeper in a personal fall arrest system?